36' (11,000mm) x 1500 Ton Cincinnati 1500H Hydraulic Press Brake

269"/22'5" (6833mm) Between Housings

s/n 35300

36’0" O.A.L. was extended from 30’-10M
We have the factory prints on this machine
It’s fabrication, it was done properly.

22’-5" / 6.82M Between Housings

18" STROKE-

24" BED

Standard brake no back gage or controller

Cylinders rebuilt in 99’ per previous owner. They where in great shape upon my visit and inspection as you can see in these pictures.

This unit ran just fine with no known problems or noises from the pump, etc..

Approx. overall weight is # 325,000 Lbs / 147.42 Metric Tons

The brake was removed from the factory by Cincinnati Inc.

Their report was good. 2 small things on reinstall, bed shoes, bolt clean up only.

OWNER PURCHASED THE UNIT IN FALL 10-09-09 AND ARE STORING IT IN A TEMPORARY ENCLOSED BUILDING.

THE CYLINDERS ARE IN A TEMPERATURE CONTROLLED ROOM.

THE HYDRAULIC SYSTEM HAS BEEN COMPLETELY CLEANED DOWN AND IS COVERED AND STORED UNDER COVER.

ALL PARTS FOR RE- ASSEMBLY HAVE BEEN CLEANED AND ARE READY FOR REASSEMBLY.

THE SMALL JIB CRANE WAS NOT SENT TO US, THERFORE NOT INCLUDED.

SADLY ISSUES WITH INSTALLATION LEAVE US WITH NO CHOICE BUT TO SELL. (WATER TABLE FOR FOUNDATION)

RAM 70,000# ( HYDRAULIC CRANE SCALE WEIGHTS )

BED 104,000# “ “ “ “

HOUSINGS 63,000 # EACH “ “ “ “

HYDRAULIC POWER PACK APPROX 11,500

CYLINDERS APPROX 7,500 # EACH

PLUS MISC -PIPING, MECHANICAL CONTROLS OFF RAM, BED, BOLTS, BED SHOES…ETC..

It will take 5 trucks to move this machine.